Packaging information
CTN Szie: 40 × 30 × 20 cm
G.W./CTN:10 kg
QTY/CTN:150 set/carton
Product Name: Automobile double-sided turbine F1-Z the intake turbine
product Introduction
the single-sided turbine is installed on the intake hose of the engine. When the engine starts normally, it uses the inertial tension of the natural intake of the engine to drive the space wheel disc to rotate at a high speed, at the same time of rotation, a large amount of fresh air is driven into the engine without breaking off. At the same time, intake air is forced to generate vortex, so that the high-speed rotating air can mix with the fuel injected from the nozzle, at the same time, it can greatly improve the air density within intake hose.
, the mixed gas efficiency will be greatly increased, and will produce greater explosive force during combustion, which actually has the effect of improving power.
Products brand: dwxb
yan color: black, blue, red, silver
weight the amount: 220g
feet inch: thick double-sided wheel diameter is about 6.5, length is about 7.5.
Material quality: aluminum alloy + silica gel
with member: double-sided turbine three caliber silicone case height 55 mm1.552.65 + 3.71mm
applicable vehicle model: General
installation Instructions: it is installed in intake hose between the air box and the throttle valve of the original car. When installing, it depends on the size of the intake hose diameter of the original car and the thickness of the rubber collar provided by the power wheel itself, the three rubber collars brought by the dynamic wheel have different thickness, and are suitable for installation according to the size of intake hose diameter.
Applicable car type size (for reference only) Toyota 56-65mm(800cc ~ 2000cc) Ma Zida 71mm
(Greater than 2000cc) Ford 56-71mm(800cc ~ greater than 2000cc) Honda 71mm (greater than 2000
cc) Mitsubishi 71mm (greater than 2000cc) Nissan 65mm(1300cc ~ 2000cc)(there are three caliber silicone sleeve (height is 55mm) available: 1.55 LEDs) here is a double-sided set of 3 pieces
