Car Waxer Polishing Disk Sponge Wheel Polishing Sponge Angle Grinder Polishing Machine Roulette Wheel Professional Production
SKU
体积
尺寸
装箱数
重量
价格￥
5.50
($) US dollar price changes with exchange rate
Detail
When polishing, the line of sight should be focused on the edge of polishing disk, and do not exceed the corner position to prevent throwing through the edge.
Angular position. When throwing Yi sub-board, there are more corners and more planes with smaller areas, which can be used polishing disk edge
throw these planes.
How to change different postures according to different faces and choose which side of polishing disk to throw different planes.
When polishing, when polishing disk is applied to the gap of the car body, press stop polishing machine, and then move the polishing machine in the opposite direction,
press the Start button at the same time to move quickly, which is the handling method when polishing disk encounters danger.
The so-called danger is that the gap will cause polishing disk damage. What is difficult to deal with is the part near The Gap,
what tricks should be used to throw, which can not only avoid the gap but also the department close to the gap.
