HB108 elliptic double shake Hengbang electronic cigarette lighter USB Yanju lighter mixed batch

HB108 double shake USB series, four models of color ice, kingpin, ice, ice, support lettering engraved according to cost contact customer service.

buyers: note

1, containing pressurized flammable gas, please stay away from children; 2, do not puncture or throw playing with lighters, never thrown into the fire; 3, please use in a well ventilated environment, pay attention to flammable materials; 4, direction is strictly prohibited toward the face, skin, and clothing and other combustible material, in order to avoid danger; 5, when the ignition to admit please accurate burner position, moderate by the dozen ignition. Different styles of lighter using different ignition: divided into straight fight, side dozen, dozen the side; gasoline engine should be fast friction wheel, bright sound of machines with the thumb from right to left fast friction roller; 6, use, if not careful soot and other debris falling into the crater, timely blowing hard to remove debris, otherwise it will cause fire bad; , seer and petrol lighters, such as machine cover open, the gas is began to escape. Therefore, no ignition, please be sure to cover tightly with the machine cover save; 8, this product is not suitable for lighting, do not continue to burn for more than 1 minute, lest high temperature burn the skin; 9, do not for a long time will lighter in a high temperature environment (Celsius 50 degrees Celsius / Fahrenheit 122 degrees) and avoid direct sunlight for a long time, such as around the stove, outside a closed no one compartment and trunk; 10, due to the climate at an altitude of 3000 meters above the area of combustion conditions limit, wind and straight into the kind of lighter ignition performance will be influenced to a large extent. In this case, using fire in the category of lighter; 11, desktop and other crafts lighter when in use should be clear the crater, by the dozen, an air inlet, a flame regulating device to make the correct use; 12, should use qualified butane gas, low-quality gas may damage lighter or reduced service life.

Adjust the flame

1, when used with the product gas content is reduced and the change of the ambient temperature, the height of the flame will change to a certain extent, this is a normal phenomenon, you can properly adjust the flame height; 2, when in use, the normal flame height should be regulated in : wind and straight into the 1.5 kind of lighter - 2.5 cm; Langqing, gasoline and lighter flame is 2.5 - 4 cm; 3, if you need to adjust the height of the flame, please use the screwdriver at the flame regulator itself with grooves; such as lighter adjusting ring, can be directly used to adjust the finger (-) that is along the direction of the arrow the clockwise rotation, can reduce the flame height; (+) to the direction of the arrow is anticlockwise, can increase the flame height. Note: counterclockwise rotation, not in the normal flame height based on more than half a circle. Otherwise, it may damage the product; 4, petrol lighters should by adjusting the ignition wick height to control the flame height. The flame height is too high, use scissors to wick a little; if the flame height is too low, may be appropriate to pull out the wick.

filling method

1, filling, the surrounding absolutely can not have Mars or fire, to ensure safety. Never smoking near the edge of the aerated; 2, should be the use of qualified butane gas, low-quality gas may damage a lighter or reduced service life; 3, ordinary type filling, please inverted lighters, gas bottle outlet alignment and cover lighter air inlet, with the beat several times, each to keep 2 seconds; if the gas can not add the word may be retained inside the steam excess air. At this point you can bleed, using a small screwdriver alignment shortness of inlet gas 1 - 2 times, then filling operation; 4, bright sound of machines in the aerated, please first with the word screwdriver tool to release the air inlet screw cap, and then in accordance with the above steps. After the end of the aerated, screw capping can be flat, not too tight; otherwise it will cause the machine lid density and machine head voice is not clear, but also to the escape of gas. Hardcover Langqing confidential with gas special nozzle with aerated; gas 5, gasoline engine, should open the skull, drew and reverse movement, opened the outer layer of sponge by adding appropriate amount of gasoline, gasoline into the inner layer of cotton, sponge on the outer cover, and then set into the casing; 6, all kinds of lighters added fuel, at least to wait 1 minute, the new filling gas temperature adjustment to room temperature, and attached to the lighter appearance of residual gas volatilization completely before ignition. If the ignition operation immediately, residual gas may cause the lighter appearance of burning, causing unnecessary danger. If the flame height is too high or too low, it is a normal phenomenon, and it can be used to adjust the height of the flame. buyers: note

1, containing pressurized flammable gas, please stay away from children; 2, do not puncture or throw playing with lighters, never thrown into the fire; 3, please use in a well ventilated environment, pay attention to flammable materials; 4, direction is strictly prohibited toward the face, skin, and clothing and other combustible material, in order to avoid danger; 5, when the ignition to admit please accurate burner position, moderate by the dozen ignition. Different styles of lighter using different ignition: divided into straight fight, side dozen, dozen the side; gasoline engine should be fast friction wheel, bright sound of machines with the thumb from right to left fast friction roller; 6, use, if not careful soot and other debris falling into the crater, timely blowing hard to remove debris, otherwise it will cause fire bad; , seer and petrol lighters, such as machine cover open, the gas is began to escape. Therefore, no ignition, please be sure to cover tightly with the machine cover save; 8, this product is not suitable for lighting, do not continue to burn for more than 1 minute, lest high temperature burn the skin; 9, do not for a long time will lighter in a high temperature environment (Celsius 50 degrees Celsius / Fahrenheit 122 degrees) and avoid direct sunlight for a long time, such as around the stove, outside a closed no one compartment and trunk; 10, due to the climate at an altitude of 3000 meters above the area of combustion conditions limit, wind and straight into the kind of lighter ignition performance will be influenced to a large extent. In this case, using fire in the category of lighter; 11, desktop and other crafts lighter when in use should be clear the crater, by the dozen, an air inlet, a flame regulating device to make the correct use; 12, should use qualified butane gas, low-quality gas may damage lighter or reduced service life.

Adjust the flame

1, when used with the product gas content is reduced and the change of the ambient temperature, the height of the flame will change to a certain extent, this is a normal phenomenon, you can properly adjust the flame height; 2, when in use, the normal flame height should be regulated in : wind and straight into the 1.5 kind of lighter - 2.5 cm; Langqing, gasoline and lighter flame is 2.5 - 4 cm; 3, if you need to adjust the height of the flame, please use the screwdriver at the flame regulator itself with grooves; such as lighter adjusting ring, can be directly used to adjust the finger (-) that is along the direction of the arrow the clockwise rotation, can reduce the flame height; (+) to the direction of the arrow is anticlockwise, can increase the flame height. Note: counterclockwise rotation, not in the normal flame height based on more than half a circle. Otherwise, it may damage the product; 4, petrol lighters should by adjusting the ignition wick height to control the flame height. The flame height is too high, use scissors to wick a little; if the flame height is too low, may be appropriate to pull out the wick.

filling method

1, filling, the surrounding absolutely can not have Mars or fire, to ensure safety. Never smoking near the edge of the aerated; 2, should be the use of qualified butane gas, low-quality gas may damage a lighter or reduced service life; 3, ordinary type filling, please inverted lighters, gas bottle outlet alignment and cover lighter air inlet, with the beat several times, each to keep 2 seconds; if the gas can not add the word may be retained inside the steam excess air. At this point you can bleed, using a small screwdriver alignment shortness of inlet gas 1 - 2 times, then filling operation; 4, bright sound of machines in the aerated, please first with the word screwdriver tool to release the air inlet screw cap, and then in accordance with the above steps. After the end of the aerated, screw capping can be flat, not too tight; otherwise it will cause the machine lid density and machine head voice is not clear, but also to the escape of gas. Hardcover Langqing confidential with gas special nozzle with aerated; gas 5, gasoline engine, should open the skull, drew and reverse movement, opened the outer layer of sponge by adding appropriate amount of gasoline, gasoline into the inner layer of cotton, sponge on the outer cover, and then set into the casing; 6, all kinds of lighters added fuel, at least to wait 1 minute, the new filling gas temperature adjustment to room temperature, and attached to the lighter appearance of residual gas volatilization completely before ignition. If the ignition operation immediately, residual gas may cause the lighter appearance of burning, causing unnecessary danger. If the flame height is too high or too low, it is a normal phenomenon, and it can be used to adjust the height of the flame.