Name: tail throat and exhaust pipe of vehicle 7653
Material: stainless steel
Weight: 254 g
Size: package 16*8.7*8.7cm
Packaging: carton
Packing: 120 pieces/piece
Tank gauge: 45 * 55 * 65 cm
Suitable for 1.5-2.2 exhaust capacity tail throat bend
Installation method Screw connection is adopted. After loosening the screw on the tailpipe, put the tailpipe in the proper position at the tail of the car exhaust pipe, and then use a wrenchTighten the screws. It only takes 5 minutes to do it yourself!
Tips:
1. The distance between tail throat and bumper should be more than 2cm to avoid burning bumper at high temperature of exhaust gas.
Please wear gloves when installing, in case of any injury.
3. Please do not install this product when the car stops or starts, so as to avoid burning by the exhaust pipe.
introduce
For the function of automobile body, automobile exhaust pipe can reduce the vibration and noise and prolong the life of exhaust muffler system. The main material of the exhaust pipe is stainless steel. For ordinary cars, due to the high pressure of the exhaust gas leaving the engine, the noise generated by the exhaust gas may be maddening, and the main silencer is the exhaust pipe of the car. The muffler is installed inside the exhaust pipe, which greatly reduces the noise of the car. The main working principle is to separate the air flow through multiple channels. These diverges only result in the friction and impact of each other, which gradually reduces the flow rate of the air flow. Such repeated circulation finally causes the exhaust gas to flow out through the exhaust pipe of the car and reduces the noise! So as to achieve daily car noise reduction effect.
