Pipe Exhaust Tail Throat Seal One Outlet Two Bevel Thickened Stainless Steel Tail Throat Tail Pipe Muffler Tail Throat

Product Name: car modification exhaust pipe

model: one out of two silver Black Bend-Bevel

material: Stainless steel

weight: 320g

packaging: carton

packing: 60

suitable for models with 1.5-2.2 exhaust gas tail throat shape: Curved

universal tail throat, suitable for exhaust pipe diameter less than 5.3-3.8cm on the market [except for small size] most models, you can choose according to the exhaust pipe of the vehicle, the exhaust pipe is straight, choose from straight, if it is curved, you can choose curved style.

[Determine whether the tail throat is appropriate]] the inner diameter of the tail throat interface is 63MM, measuring the outer diameter of the car exhaust pipe, which can be used if it is smaller than 58MM.

Installation method: adopt the screw connection method, loosen the screw on the tail pipe and put the tail pipe in the appropriate position at the tail of the automobile exhaust pipe, and then tighten the screw with a wrench. It only takes 5 minutes to finish it easily and easily!

[Tips]]

1. The distance between the tail throat and the bumper should be more than 2cm, so as not to burn the bumper with high temperature of exhaust gas.

2. Please wear gloves when installing, in case of no small injury.

3. When the car just stops or starts, please do not install this product to avoid being scalded by the exhaust pipe.