-size:16pt;" >2, to equipment connected to the EPOWER is completed,press the switch immediately powered; unplug connector, one minute sleep
3, when you recharge the EPOWER, and five led cycle flashing, five full brightness for recharging is completed
4, have a battery indicator function for external charging/current supply process, led display, display 1, built-in battery for 20%, show 2, electricity is 40%, and so on. When the charge is low, the five shining
5, if you want to use LED lighting function, start lighting function on/off 5 seconds long, then short press the on key to switch the lighting State. As follows: strong light, strobe, SOS, close
6, please store this product in a cool, dry place, avoid direct sunlight
(B) Special Note:
12V car starts, confirm the EPOWER charge indicator at 3 or more, the Red clamp clamp the battery positive (+) pole, black clips clamp the battery negative (-) pole; then the battery cable connector into the EPOWER, auto ignition switch to start (START) position. Car starts, immediately pull out the plug and then remove the battery clamp.
