All stainless steel case, clean and hygienic,Durable. Envelope filter paper, simple and convenient, easy to replace, clean, to avoid the common short - connect defect. High performance motor, super - temperature protection, high - temperature gear pump, in line with national health standards.
Product introduction:
1. The oil filter vehicle can not only filter the black carbonized substances and other impurities in the oil, but also filter the water in the oil through the oil filter paper. As a result, the oil and water mixture will be produced in the process of cooking and frying, and the oil and water mixture will affect the quality of the oil at high temperature. Its advantages will be greatly reduced, and affect the service life of oil, in the process often cooked food through powder, lead powder composition by high temperature into producing black carbon, these can make the oil of carbon black sticky product on the skin after Fried, make the product a pot a pot than black, and makes a taste of fruit powder cannot fully penetrating into the food, the food taste is reduced, at the same time; Food particles in the oil under the high temperature decomposition, which greatly shorten the oil life, increase the cost of oil and gasoline filtration oil in carbon black, effectively prolong the service life of oil, oil saving, achieve the purpose of cost saving, so the filter block is a fast-food restaurant, convenience stores, self-service food places such as improve the quality of Fried food, ideal equipment to reduce costs. All stainless steel case, clean and hygienic,Durable. Envelope filter paper, simple and convenient, easy to replace, clean, to avoid the common short - connect defect. High performance motor, super - temperature protection, high - temperature gear pump, in line with national health standards.
2 product features Adopt the universal caster with brake system, which can be easily pushed and operated by the foot, which is convenient and labor-saving. The high and low design conforms to human structure.
3. Safety instructions All operators must strictly observe the safety standards for electricity use. The machine can be operated only by specially trained staff who can strictly follow the operating rules and troubleshoot common faults. All operations can only be used in a safe condition. The machine must be normally installed and debugged before running. The machine can only operate after the machine has been tested and made sure that it is correct. For your safety, please wear heat protective gloves when operating the filter truck. Don't push the filter cart with hot oil. The electrician must be responsible for the maintenance of the circuit, the machine and the installation of the machine. It is strictly prohibited to flush the following parts of the cylinder face directly with water. 4 the warranty This machine is only used to filter oil, remove oil impurities, and damage the machine for any other purpose. The company is not responsible for the following situations.1; Because of improper use or because of not using the device as intended.2; Improper installation or maintenance, continue to use the machine when parts are damaged.3; Ignore the operation process, especially the loss caused during storage, transportation, installation, commissioning, maintenance or maintenance.4. Replace the parts without the dealer's written permission.5; Routine maintenance of parts that are prone to wear and tear.6; Force majeure.5 steps of oil filtration operation 1; Check whether the joints are tightened.2; Plug in the power, open the switch test, no abnormal sound, power off.3; Wear heat protective gloves.4. Put the oil out and put the oil that needs to be filtered into the filter truck from the blast furnace.5; Hold the handle of the oil gun with your right hand. The nozzle of the oil gun is facing the oil cylinder of the blast furnace. Turn on the power switch with your left hand.6; After filtering the oil, turn off the power switch and unplug the power.(note) the effect is better if oil filter powder is applied to the filter paper.After filtering oil every day, the filter truck must be clean and clean. The oil should not be stored in the tank to avoid oil plugging.6 cleaning When the oil is finished, the filter truck can be cleaned after the filter truck cools (at a temperature that can be touched by hand).1; Loosen the connection between the oil pipe and the oil pump counterclockwise.2; Take the filter element out of the cylinder.3; Clean up the residue on the filter paper and cover with powder.4. Check the filter paper. If the filter paper is not damaged, it can be used for a second time. If the filter paper is damaged, please loosen it, remove the filter paper and clean the filter net.5; Clean the motor cover with a clean towel and do not rinse directly with water.6; The inside of the oil pocket can be rinsed directly with water, and the sewage can be discharged through the ball valve at the bottom of the oil pocket.7. Put the filter element back into the oil pocket.8; Wind the wire around the reel.9. Push the filter truck to the storage area, brake with your foot, and fix the filter.10; After cleaning, remove and hang the sucker pipe on the handle hook, so as to avoid the blockage of the tubing and the failure to pump the oil, thus causing unnecessary wear and tear of the motor.7. Common faults and troubleshooting 1; No power, cause; (1) power line failure, check the line, and troubleshoot the fault.(2) if the power socket or plug is broken, check the socket and plug and replace it if necessary.2; Turn on the two-position switch and the motor will not work.The reason is that there is something wrong with the motor or the circuit fault. Please check the motor and the circuit.3; (1) the pump is damaged, the gear is damaged, or the shaft and sleeve clearance is too large and the oil cannot be pumped.(2) the oil pipe connection is leaking oil or the oil pipe is broken. Check the oil pipe. If the oil pipe connection is leaking oil, see if it is loose.(3) the tubing is blocked, cleaned and dredged.
