Power consumption: 20W for glue sticks: small glue stick 7-7.5mmproduct features:1, very practical, very suitable for home. To insert the tail block glue from the glue gun for 5-8 minutes press the trigger to extrude glue. This product uses the high-tech ceramic PTC thermistor as heating element, heat up fast, constant and accurate, saving energy consumption.
2 and no voltage limit, working between the 100V~240V frequency: 50-60HZ safety design prevents overheating, built-in safety fuseto use: 1, 7~7.5 mm diameter of glue from the glue gun to insert the barrel in the plugged in 5-8 minutes after the warm-up, pulled the trigger can squeeze out glue (don't worry, preheated before use, or press the trigger, without melting the glue stick through his mouth).
2, burn a strip, ban will strip out, next after 5-8 minutes of preheating can be plugged in directly. Notes:
1, work glue gun nozzle and molten adhesive high temperature, do not touch the body, to avoid burns due to the high temperature glue gun is used PTC heating element, if the long time does not make glue, please cut off the power supply to avoid melting causing gum strip back and damaged glue gun. This tool is not in use it must be placed in the bracket.
2, glue gun without being banned should be placed in a dry and ventilated place in damp places prohibited to children to play with.
Note: when the glue gun is not in use, be sure to
Turn the power off, can't let the glue gun never used
Power up!!!!
